Turbosmart Internal Wastegate Actuator (10PSI) - Abarth 500/595/695 312 (Garrett Turbo) Fitment Confirmation:Yes, it's correct for my application. Gripper can even set a

Gripper can even set a differential up that operate differently on left and right hands bends for short oval races

which equates to a 23% increase in comparison to the original pipework

F20/F21 1 Series

Push your DCT M2 hard enough at the track and you'll know about the buzz-killing limp mode in relation to DCT temps

Cold air straight to the turbo charger

Turbosmart Internal Wastegate Actuator (10PSI) - Abarth 500/595/695 312 (Garrett Turbo) Fitment Confirmation:Yes, it's correct for my application. Gripper can even set aThe Turbosmart Internal Wastegate Actuator provides better turbo response and greater sensitivity, when managing boost pressures. Designed as a direct bolt on replacement for the factory part and is easy to install with no special tools or fabrication required. An internal wastegate has the wastegate valve built into the turbine housing. The wastegate valve is controlled by an actuator which consists of a spring and a sealed chamber. The sealed