AWMS Skyline Standard Coping 90 Degree Internal Corner - Mill (Unfinished) FASCIAS and a Robust polyester topcoat

and a Robust polyester topcoat

Top and Bottom Inner Collar and Infill Strip

You will see from the diagram below the pre-set sizes and the choice of widths (heights) available so that you can choose the correct size for your project

resistant and has been formally performance tested as follows:

Wall Thickness Coping Width Gauge Fixing Straps Included 91-120mm 182mm 2mm 1 121-150mm 212mm 2mm 1 151-180mm 242mm 2mm 1 181-210mm 272mm 2mm 1 211-240mm 302mm 2mm 1 241-270mm 332mm 2mm 1 271-300mm 362mm 2mm 1 301-330mm 392mm 2mm 1 331-360mm 422mm 2mm 1 361-390mm 452mm 2mm 1 391-420mm 482mm 2mm 1 421-450mm 512mm 3mm 2 451-480mm 542mm 3mm 2 481-510mm 572mm 3mm 2 511-540mm 602mm 3mm 2 541-570mm 632mm 3mm 2 571-600mm 662mm 3mm 2 601-630mm 692mm 3mm 2 631-660mm 722mm 3mm 2 661-690mm 752mm 3mm 2 691-720mm 782mm 3mm 2 721-750mm 812mm 3mm 3 751-780mm 842mm 3mm 3 781-810mm 872mm 3mm 3 811-840mm 902mm 3mm 3 841-870mm 932mm 3mm 3 871-900mm 962mm 3mm 3 901-930mm 992mm 3mm 3 931-960mm 1022mm 3mm 3 If you are unsure as to the width of the coping you require

AWMS Skyline Standard Coping 90 Degree Internal Corner - Mill (Unfinished) FASCIAS and a Robust polyester topcoatAWMS Skyline Standard Coping 90 Degree Internal Corner The Alumasc Skyline aluminium wall coping system provides a quick, easy and cost effective solution to finishing upstanding parapet walls on flat roofs. Each 90 Degree angle is supplied with 1 and a half strap fixings which secure to the top of the wall allowing for the coping to simply click down into place, avoiding the need to penetrate the finished surface while maintaining air movement over